Pair of Vintage Old School Fru
HomeBlogAbout Me

Rheem Furnace Capacity Model Numbers



Rheem Furnace Capacity Model Numbers

How many tons is my Rheem air conditioner or heat pump?

Tuesday, March 19, 2019 Intego mac premium bundle x9.

You can determine the “nominal” condenser tonnage of your HVAC system by examining the model number on the data plate at the side of the condenser (outdoor unit). Just like the nominal size of lumber or an air conditioning filter, the exact cooling capacity may be a little more or less than the nominal rating, but it’s close.

Heating Capacity BTU/Hr kW 41,000 12 60,000 18 80,000 23 99,000 29 119,000 35 Heat Ext. Static Pressure kPa.10.025.12.029.15.037.20.05.20.05 Blower (D x W) mm 11 x 6 279 x 152 11 x 7 279 x 178 11 x 10 279 x 254 11 x 10 279 x 254 11 x 10 279 x 254 Motor H.P.–Speed– PSCType W 1/2-4-PSC 373 /2.

For Rheem, you should look for the second cluster of digits of the model number. It will have a number divisible by 6 or 12, and represents the nominal BTU of the system in thousands. A ton of air conditioning equals 12,000 BTU, and 60 divided by 12 equals 5, so the data plate below indicates the system is 5 tons.

For Rheem, you should look for the second cluster of digits of the model number. It will have a number divisible by 6 or 12, and represents the nominal BTU of the system in thousands. A ton of air conditioning equals 12,000 BTU, and 60 divided by 12 equals 5, so the data plate below indicates the system is 5 tons. The Rheem Heat Pump System is engineered to improve energy savings and comfort all year long. Designed specifically for quiet operation, the Rheem RP1636AJ2NA, RH2V3621MTANJA gives you a higher level of comfort while keeping your utility bills low.

How to disable microsoft remote desktop client for mac. Here’s a rundown of the range you will encounter: 18 = 1.5 tons, 24 = 2 tons, 30 - 2.5 tons, 36 = 3 tons, 42 = 3.5 tons, 48 = 4 tons, and 60 = 5 tons.

If you are unsure whether you have found the right two numbers, you can double-check it by looking for the “RLA” rating on the data plate. RLA is an acronym for Rated Load Amperage, and is what the maximum amperage should be when the condenser up and running. If you divide the RLA by 6 for older units and 5 or 6 for newer units, you should get a number that approximates (not exactly) the tonnage of the system. Make sure you use RLA and not LRA, Locked Rotor Amperage, which is the surge of amps necessary to overcome inertia and start the system. It averages around five times the RLA.

To determine the age of a Rheem system, go to our blog post How can I tell the age of a Rheem heat pump or air conditioner from the serial number?For the age of another brand or manufacturer, go to our blog post How do I determine the age of my air conditioner? Andy timmons tab book pdf.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • •

To learn more about heating and air conditioning systems, see these other blog posts:

• How can I find out the SEER of my air conditioner?

• My air conditioner won't turn on. What's wrong?

• How can I find out the size of my air conditioner?

• How can I find out the age of my air conditioner or furnace?

• How can I tell whether the condenser (outdoor unit) is an air conditioner or heat pump?

• Where is the air filter for my central air conditioner and furnace? I can’t find it?

• Does an old air conditioner use more electricity as it ages?

• How did homes stay cool in Florida before air conditioning?

Model

• What is wrong with an air conditioner when the air flow out of the vents is low?

• Why has the thermostat screen gone blank? Age of mythology for mac.

• Why does it take so long to cool a house when an air conditioner has been off for a while?

• Why is my air conditioner not cooling enough?

• What are the most common problems with wall/window air conditioners?

• Will closing doors reduce my heating and cooling costs?

Visit our HEATING AND AIR CONDITIONING page for other related blog posts on this subject, or go to the INDEX for a complete listing of all our articles.

<< How many tons is my Aire-Flo air conditioner or heat pump? | Recent Blogs | How may tons is my Ruud air conditioner or heat pump? >>

How To Look At A House

McGarry and Madsen's home inspection blog for buyers of

site-built, mobile/manfuactured and modular homes

Click Below

for Links

Rheem Furnace Model Number Lookup

to Collections

of Blog Posts

by Subject

Rheem Furnace Dimensions

Top 5 results given instantly.

Click on magnifying glass

for all search results.





Rheem Furnace Capacity Model Numbers
Back to posts
This post has no comments - be the first one!

UNDER MAINTENANCE